Dear ladies and gentlemen,
We are pleased to offer you the new dry-cap uv 4® to be able to present.
In line with our vision, we have incorporated bundled high-tech know-how and expert opinions into further development.
The result offers convincing highlights:
The patented SMART mode automatically determines the optimal drying time of between 90, 120 or 180 minutes based on the current dry room temperature and humidity measured by the integrated sensor.
Drying is primarily carried out by a ventilator, which directs room air to hearing systems and charging devices. Drying is reinforced by preheating the air up to 38°C (100°F). As a result, more moisture can be absorbed and this leads to even better drying results without damaging the batteries of hearing aids.
The four UV-C LEDs emit 275 nm wavelength through a wide aperture angle, so that 99.99% of all viruses, bacteria and fungi are eliminated in just 5 minutes. This was confirmed by an accredited institute with a certificate.
The new dry-cap uv 4® continues to score points with a universal USB power supply with 4 country-specific adapters. In addition to the USB-C input, the device has another USB-C output that allows you to connect a 5V/0.5A charger with the 30cm USB-C cable. Drying, hygienic and charging the hearing aids at one power outlet at the same time is convenient.
The new dry-cap uv 4® is a medical device and meets the high requirements for medical devices (class I) of Medical Devices Regulation (EU) 2017/745.
The new dry-cap uv 4® will be available from the end of March 2025.
Your flow-med team
